[Qt] show conflicts of unconfirmed transactions in the UI ...
Two unconfirmed transactions sitting in bitcoin core/qt ...
Erste Schritte – Bitcoin Wiki
The Bitcoin Protocol: How It Works - DZone Cloud
Please Help! Wallet is sending transactions twice and my BTC is vanishing!
Hello! Any help would be very appreciated! In mid December I decided it had been a long time since I touched my BTC and with all the drama I decided I should move to a more updated wallet software on my PC. The old wallet I was using is Bitcoin (or Bitcoin-QT?) v0.8.6-beta. I was trying to send it to a new Electrum wallet, but that should be irrelevant. Basically what I think has happened is that I was sending the BTC across one at a time, one of the transactions was sent twice a couple seconds apart for some reason. The wallet subtracted that amount from my balance, but since the transaction never confirmed it's now stuck in limbo. This was around the time confirmations were taking a long time so I thought it might sort itself out but now it's a month later and it's still unconfirmed. Now here's the weird part, as far as I can tell the balance is only off by 1 BTC, but this appears to have happened with three transactions:
Anyone have an explanation for where is going on here? The next place I would go is to start exploring the blockchain myself but that's not something I've ever done before so I thought I would ask you guys first. Also I should mention that the only reason I think anything went wrong is because of my own personal records I have which show that I should have 1 more BTC left in my old wallet plus some change but instead all that the wallet says is left is 0.0416 BTC (which is the change I think).
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), uninstall all earlier versions of Bitcoin, then run the installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or bitcoind/bitcoin-qt (on Linux). If you are upgrading from version 0.7.2 or earlier, the first time you run 0.9.0 your blockchain files will be re-indexed, which will take anywhere from 30 minutes to several hours, depending on the speed of your machine. On Windows, do not forget to uninstall all earlier versions of the Bitcoin client first, especially if you are switching to the 64-bit version.
Windows 64-bit installer
New in 0.9.0 is the Windows 64-bit version of the client. There have been frequent reports of users running out of virtual memory on 32-bit systems during the initial sync. Because of this it is recommended to install the 64-bit version if your system supports it. NOTE: Release candidate 2 Windows binaries are not code-signed; use PGP and the SHA256SUMS.asc file to make sure your binaries are correct. In the final 0.9.0 release, Windows setup.exe binaries will be code-signed.
The 'chainstate' for this release is not always compatible with previous releases, so if you run 0.9 and then decide to switch back to a 0.8.x release you might get a blockchain validation error when starting the old release (due to 'pruned outputs' being omitted from the index of unspent transaction outputs). Running the old release with the -reindex option will rebuild the chainstate data structures and correct the problem. Also, the first time you run a 0.8.x release on a 0.9 wallet it will rescan the blockchain for missing spent coins, which will take a long time (tens of minutes on a typical machine).
Rebranding to Bitcoin Core
To reduce confusion between Bitcoin-the-network and Bitcoin-the-software we have renamed the reference client to Bitcoin Core.
Autotools build system
For 0.9.0 we switched to an autotools-based build system instead of individual (q)makefiles. Using the standard "./autogen.sh; ./configure; make" to build Bitcoin-Qt and bitcoind makes it easier for experienced open source developers to contribute to the project. Be sure to check doc/build-*.md for your platform before building from source.
Another change in the 0.9 release is moving away from the bitcoind executable functioning both as a server and as a RPC client. The RPC client functionality ("tell the running bitcoin daemon to do THIS") was split into a separate executable, 'bitcoin-cli'. The RPC client code will eventually be removed from bitcoind, but will be kept for backwards compatibility for a release or two.
The behavior of the walletpassphrase RPC when the wallet is already unlocked has changed between 0.8 and 0.9. The 0.8 behavior of walletpassphrase is to fail when the wallet is already unlocked:
> walletpassphrase 1000 walletunlocktime = now + 1000 > walletpassphrase 10 Error: Wallet is already unlocked (old unlock time stays)
The new behavior of walletpassphrase is to set a new unlock time overriding the old one:
> walletpassphrase 1000 walletunlocktime = now + 1000 > walletpassphrase 10 walletunlocktime = now + 10 (overriding the old unlock time)
Transaction malleability-related fixes
This release contains a few fixes for transaction ID (TXID) malleability issues:
-nospendzeroconfchange command-line option, to avoid spending zero-confirmation change
IsStandard() transaction rules tightened to prevent relaying and mining of mutated transactions
Additional information in listtransactions/gettransaction output to report wallet transactions that conflict with each other because they spend the same outputs.
Bug fixes to the getbalance/listaccounts RPC commands, which would report incorrect balances for double-spent (or mutated) transactions.
New option: -zapwallettxes to rebuild the wallet's transaction information
This release drops the default fee required to relay transactions across the network and for miners to consider the transaction in their blocks to 0.01mBTC per kilobyte. Note that getting a transaction relayed across the network does NOT guarantee that the transaction will be accepted by a miner; by default, miners fill their blocks with 50 kilobytes of high-priority transactions, and then with 700 kilobytes of the highest-fee-per-kilobyte transactions. The minimum relay/mining fee-per-kilobyte may be changed with the minrelaytxfee option. Note that previous releases incorrectly used the mintxfee setting to determine which low-priority transactions should be considered for inclusion in blocks. The wallet code still uses a default fee for low-priority transactions of 0.1mBTC per kilobyte. During periods of heavy transaction volume, even this fee may not be enough to get transactions confirmed quickly; the mintxfee option may be used to override the default.
0.9.0 Release notes
New notion of 'conflicted' transactions, reported as confirmations: -1
'listreceivedbyaddress' now provides tx ids
Add raw transaction hex to 'gettransaction' output
Updated help and tests for 'getreceivedby(account|address)'
In 'getblock', accept 2nd 'verbose' parameter, similar to getrawtransaction, but defaulting to 1 for backward compatibility
Add 'verifychain', to verify chain database at runtime
Add 'dumpwallet' and 'importwallet' RPCs
'keypoolrefill' gains optional size parameter
Add 'getbestblockhash', to return tip of best chain
Add 'chainwork' (the total work done by all blocks since the genesis block) to 'getblock' output
Make RPC password resistant to timing attacks
Clarify help messages and add examples
Add 'getrawchangeaddress' call for raw transaction change destinations
Reject insanely high fees by default in 'sendrawtransaction'
Add RPC call 'decodescript' to decode a hex-encoded transaction script
Make 'validateaddress' provide redeemScript
Add 'getnetworkhashps' to get the calculated network hashrate
New RPC 'ping' command to request ping, new 'pingtime' and 'pingwait' fields in 'getpeerinfo' output
Adding new 'addrlocal' field to 'getpeerinfo' output
Add verbose boolean to 'getrawmempool'
Add rpc command 'getunconfirmedbalance' to obtain total unconfirmed balance
Explicitly ensure that wallet is unlocked in importprivkey
Add check for valid keys in importprivkey
New option: -nospendzeroconfchange to never spend unconfirmed change outputs
New option: -zapwallettxes to rebuild the wallet's transaction information
Rename option '-tor' to '-onion' to better reflect what it does
Add '-disablewallet' mode to let bitcoind run entirely without wallet (when built with wallet)
Update default '-rpcsslciphers' to include TLSv1.2
make '-logtimestamps' default on and rework help-message
RPC client option: '-rpcwait', to wait for server start
Allow -noserver with bitcoind
Block-chain handling and storage:
Update leveldb to 1.15
Check for correct genesis (prevent cases where a datadir from the wrong network is accidentally loaded)
Allow txindex to be removed and add a reindex dialog
Log aborted block database rebuilds
Store orphan blocks in serialized form, to save memory
Limit the number of orphan blocks in memory to 750
Bitcoin Core GUI. As of version 0.13.2. I sent the stuck transaction. This is a bit complicated. Make sure you follow the steps exactly. On the Transactions tab, right click the stuck transaction and choose "copy transaction ID". Paste to a text editor in order to save the value somewhere. We'll call this value STUCK_TX. Once you've saved STUCK ... Currently, the GUI shows only conflicts with transaction in a block. This results in displaying replaced transaction (RBF) wrong (the replaced transaction is no longer in the mempool, but still in the wallet-transactionlist, conflicts are not detected). This PR will mark unconfirmed transactions that are not in our mempool and have conflicts as conflicted. You may simply double-click each transaction showed on Bitcoin Core GUI in turn, to find them by transaction ID, and then right-click -> Copy raw transaction. You may also use the getrawtransaction PREVIOUS_TXID command instead, you need to run this command separately on each PREVIOUS_TXID , if multiple previous transactions were spent. Bitcoin-qt will rebroadcast unconfirmed transactions every 30 minutes or so. As long as the sender has his client open, the transaction will be rebroadcast. I sent a transaction without a fee. Can I add a fee to it? You cannot add a fee to a transaction once it has been broadcasted. What you can do is create a "double spend" transaction, which ... 5BTC - 10mins hacked Script Blockchain unconfirmed bitcoin transactions video duration 3 Minute(s) 5 Second(s), published by Amy's LearnEarn on 07 02 2019 - 03:15:46.
Hack Bitcoin From Blockchain Unspent and Unconfirmed ...
This Video only for Educational purpose.After watching this video you can able to make bitcoins but don`t steal someone`s bitcoins.We just give this tool free Remember its only for education if ... Hye, Friend's Welcome To Bitcoin Script. Blockchain New #Unconfirmed Transaction Hack Script (#Earn_Bitcoin) #2020 Bitcoin #Hack #4BTC Download the script us... bitcoin private key finder download, bitcoin private key scanner, bitcoin private key with balance, bitcoin, bitcoin private key finder software, get private key from bitcoin address, get private ... On Unconfirmed Transactions address copy Hash 160 key and paste on alert box and press ENTER. 8. Enter your bitcoin address on alert box to change the receiver address and press ENTER. Blockchain Hack Script 2020 GENERATES Unlimited Bitcoin 100% WORKING Bitcoin Backed. How to use: 1. Create New Account on Blockchain. 2. Copy the Code of Script . 3. Right click on the mouse and ...